StrataRise Multi-Level 3560 Pedestals for Pavers and Tiles are adjustable from 35mm to 60mm (500mm + with extensions). These advanced supports are very quick and easy to use to achieve professional results.
Available in packs of 10 or 30 pieces. PACK PRICES ARE INCLUSIVE OF DELIVERY UK ZONE 1.
BULK PRICES AVAILABLE - PLEASE ENQUIRE
Warning: Last items in stock!
StrataRise Multi-Level 3560 Pedestals are adjustable in height from 35mm to 60mm. The adjustable height can be increased by using one or more of our QuickClick bayonet fitting, extension pieces to achieve the required height range. The system can be extended to 500mm high, or more as required.
The multi-level pedestals make it easy to achieve perfect flatness of the final floor or paved area. The system is very easy to use and aids quick, precise and professional installation.
There are two versions available to cover most requirements for indoor or outdoor flooring and/or paving. Each support is composed of a Base Plate, an adjustment dial and a threaded head section with 4 removable tabs (2mm or 4mm in width for paver or tile spacing).
An easy to operate adjustment dial makes raising or lowering the head really quick and precise. The large 200mm (8”) base plate provides stable support on most surfaces.
StrataRise Multi-Level 3560 Pedestals are tested to withstand loads of 800 Kg at maximum raised position (over 1000 Kg when at minimum height adjustment).
Thanks to the large support area of the pedestal bases the system can be installed on top of waterproofing membranes, rigid insulating panels and onto any solid, compact laying surface.
The circular shape of the base adapts well to the course of the laying surface, even when this is not perfectly regular. The base incorporates holes for the outflow of water and two head-cut lines to be used when laying the supports at perimeter edges or corners.
Acoustic underlay Rubber Bases and acoustic cushion rings for the support heads are also available.
Low Profile versions of these supports are also available for areas where low threshold heights are an issue - Please see our 1836LP Range for details.
In addition to the pedestal supports for Tiles and Pavers, the StrataRise range includes versions for use with joist or beam supported decking and flooring installations.