Sound transmission from upper floors into the rooms beneath can present problems in many homes, with footfall and other noise sources being amplified by use of hard flooring surfaces like tiles or laminates. Quantum underfloor provides a cost effective solution.
Warning: Last items in stock!
|5||£ 54.72||Up to £ 14.40|
|10||£ 51.84||Up to £ 57.60|
Modern construction methods and environmental restrictions have increased the need for multi-occupancy buildings. Noise can be a very stressful and serious problem in this type of environment and therefore appropriate steps need to be taken to prevent noise transmission.
Sound transmission from upper floors into the rooms beneath can also present problems in many homes, with footfall and other noise sources being amplified by use of hard flooring surfaces like tiles or laminates. Quantum underfloor provides a cost effective solution.
Quantum Underfloor is a fully recycled rubber and cork composite material designed to absorb footfall noise in Residential and Commercial applications. The material also has a Zero ODP (Ozone Depleting Potential) and Zero GWP (Global Warming Potential).
In the construction industry Quantum Underfloor acoustic rubber membranes are designed for use on top of concrete, thereby eliminating the problems of under-screed layers which may be bridged during site installation causing expensive failures. In the domestic environment these membranes also provide an ideal under layer for laminate and other flooring, particularly on upper floors, providing a cushioning effect and substantial reductions in footfall noise.
Quantum Underfloor is suitable for use under most floor finishes including:
Complies with Document E 2003 – Part H (Scotland).
Robust Detail Compliant E-FC-8.
Quantum Underfloor is available in two standard thicknesses, 3mm or 5mm, and dependent upon thickness gives different Acoustic Data performance.
The most severe Testing is normally carried out using a hard surface such as Wood Laminate or Ceramic Tile over Concrete to provide the test data.
Quantum Underfloor has undergone extensive testing both in a recognised Accredited Test Facility and also on various sites under the majority of floor finishes. The material was tested in the Frauhofer Institute in Germany and shows compliance, of the CA2 material used, to the British Document E and German DIN ISO 140-8 STANDARD when used as part of a complete Acoustic System.
Site testing for this product shows improvements of up to 23 dB.
|Application||Impact Sound Insulation: Acoustic|
|Material||Recycled Rubber and Cork Granulate Bonded with a coldcure PUR|
|Mass Density kg/m³ DIN EN ISO 845||700 kg/m³ ± 5 %|
|Standard Dimensions||Rolls: Width – 1000, Length 20M
Other dimensions upon request
|Dimensional Tolerance||DIN 7715-2 M4 ± 1.5 %|
|Material Thickness||3mm, 5mm (10mm by special order)|
|Testing Thicknesses||3mm and 5mm|
|Footfall Sound Insulation||DIN EN ISO 140-8
18 dB at 3mm and 21 dB at 5mm
Under 7mm Standard Laminate Flooring
|Chair Roll suitability||Yes|
|Compression Test according DIN EN ISO 3386-2||At 5mm:
CC 972 kPa
CC 4891 kPa
CC >10613 kPa
CC 1057 kPa
CC 5152 kPa
CC >12500 kPa
|Compression at 10% Pressure DIN 53421||5mm 0.48 MPa
5mm (E-Module) 12.2 MPa
|3mm 0.69 MPa
3mm (E-Module) 30.6 MPa
|Tensile Strength - DIN EN ISO 1798||3mm 0.80 MPa (average)
5mm 0.85 MPa (average)
|Elongation at Break - DIN EN ISO 1798||3mm 34% (average)
5mm 41% (average)
Ca. 0.12 W/m K
|Temperature Stability||-40°C up to + 110°C|
|Fire Classification||DIN 4102-1 Section 6.2 B2|
|Date||11/2008 – (No update requirement)|