1836LP-P2 & P4 Low Profile Pedestals for Tiles & Pavers
Adjustable from 18mm to 36mm - designed for low threshold height projects

The Low-Profile 1836 pedestal is a specially designed support for use in areas where low threshold heights are encountered. Each support is composed of a threaded head section with 4 removable tabs (2 mm or 4mm in width) for paver or tile spacing. The spacer tabs are individually removable to enable the supports to be used in areas where no separation is required, such as under the centres of large slabs, or on sides. (Please note: the 2mm spacer tabs are fragile and this version is only available to special order and must be shipped on a pallet to prevent damage in transit).

An easy to operate threaded adjustment ring makes raising or lowering the head really quick and precise. Height adjustments can be made without removing the paver or tile thus allowing for extremely easy and fast installation. As standard, each Low-Level 1836 pedestal comes complete with one 9mm extender ring (this can be fitted by lifting the head out of the base, inserting the ring and replacing the head).

The large 200mm (8”) base plate provides stable support on most surfaces. Scribe marks are provided on the underside to assist in trimming for use at sides and corners of installations. An optional 3mm thick anti-slip, cushioning, rubber base ring is available for use on membranes, etc. This effectively reduces transmitted noise where decks are mounted on balconies or roof areas, as well as for floors in multi-occupancy buildings.

We recommend the use of our optional acoustic cushioning rings for the support head area for tile and paver installations. These help to bed tile corners securely, prevent any rattling, and reduce transmitted noise through the support system.

1836LP pedestal supports are tested to withstand point loads of 800Kg at their maximum height adjustment.



StrataRise Pedestals ... the professional's choice!
StrataRise 1836 Low Profile Fixed Head Pedestal for Tiles & Pavers
Balcony Tiles on StrataRise Pedestals
Technical Data
StrataRise 1836 Low Profile Pedestals - Technical Drawings
Ref No. Description Adjustability (mm) Pack pcs. Pallet pcs.
1836LP P-2 30 Paver Support Pedestal with 2mm x 10mm (w x h) Spacer Bars 18 to 36 30 1350
1836LP P-2 15 Paver Support Pedestal with 2mm x 10mm (w x h) Spacer Bars 18 to 36 15 -
1836LP P-4 30 Paver Support Pedestal with 4mm x 10mm (w x h) Spacer Bars 18 to 36 30 1350
1836LP P-4 15 Paver Support Pedestal with 4mm x 10mm (w x h) Spacer Bars 18 to 36 15 -
1836LP EX9 9mm Extender Ring 9 30 3780


Suitable for laying over membranes and insulating panels

Thanks to the large support area of the pedestal bases the system can be installed on top of waterproofing membranes, rigid insulating panels and onto any solid, compact laying surface.

The circular shape of the base adapts well to the course of the laying surface, even when this is not perfectly regular. The base incorporates holes for the outflow of water and two head-cut lines to be used when laying the supports at perimeter edges or corners.

Available in two versions, this versatile pedestal support can be used with any type of self-supporting tile or paver.

Designed for the Professional

Designed for the professional, with industry leading specifications, our pedestals are the fastest and easiest to work with, allowing precise adjustment without any need to lift off the paver or tile to make adjustments. Each 1836LP Pedestal is supplied with one 9mm extension ring as standard.