Moulded polypropylene Paver Support 14mm high with water channels in base and 14mm x 4mm wide ribs to allow perfect spacing of pavers or tiles. This product is weather-proof and suited for most types of pavers and slabs laid on grit or hard surfaces.
The base of the paver support has a smooth profile which minimises the possibility of damage when used on top of bituminous or other membranes. The base can be easily split into quadrants or halves for perimeters and corners.
3mm thick spacer rings, again easily divided into halves or quadrants, are available to compensate for minor variations in the levels of the laying surface. The spacers can be stacked for larger adjustments.
The PS2 paver support is also designed to be stackable so, if larger adjustments are required than can be achieved using multiples of the 3mm spacer shim rings, you can simply stack additional 14mm base supports together to achieve 28mm or higher support levels as required.
Recyclable at end of life.
Bulk Box: 360 pieces.
Also sold in boxes of 30 or 60 pieces.
Height: 14mm (with 14mm high x 4mm wide spacer ribs)
PS2-14 Moulded plastic Paver Support
PS2-14-3 3mm thickness spacer ring