35 to 60mm Decking & Floor Joist Support Pedestal

New product

StrataRise Multi-Level 3560 Pedestals for Flooring and Decking are adjustable from 35mm to 60mm (500mm + with extensions). These advanced supports have a high load capacity and typical installations will require fewer pieces than would be needed with our popular, more basic, Uni-Level systems.

Sold in packs of 15 or 30 pieces.  PACK PRICES ARE INCLUSIVE OF DELIVERY UK ZONE 1.

TRADE BULK PRICES AVAILABLE - PLEASE ENQUIRE

More details

£ 71.00 VAT incl.

  • 30 pack
  • 15 Pack

Data sheet

Weight 0.158 Kg

More info

StrataRise Multi-Level 3560 Pedestals are adjustable in height from 35mm to 60mm. The adjustable height can be increased by using one or more of our QuickClick  bayonet fitting, extension pieces (25mm, 50mm & 100mm) to achieve the required height range. The system can be extended to 500mm high, or more as required. (Note: It is important to ensure high rise installations are firmly anchored to prevent any lateral movement.)

The multi-level pedestals make it easy to achieve perfect flatness of the final floor or deck area. The system is very easy to use and aids quick, precise and professional installation.

Each support is composed of a Base Plate, an adjustment dial and a threaded head section with a fixing flange with screw slot used for attaching the support to a wooden joist (up to 3" wide and any standard height) for flooring or deck construction. Also suitable for use with metal or other joist systems.

An easy to operate adjustment dial makes raising or lowering the head really quick and precise. The large 200mm (8”) base plate provides stable support on most surfaces.

StrataRise Multi-Level 3560 Pedestals are tested to withstand loads of 800 Kg at maximum raised position (over 1000 Kg when at minimum height adjustment).

Suitable for laying over membranes and insulating panels

Thanks to the large support area of the pedestal bases the system can be installed on top of waterproofing membranes, rigid insulating panels and onto any solid, compact laying surface.

The circular shape of the base adapts well to the course of the laying surface, even when this is not perfectly regular. The base incorporates holes for the outflow of water and two head-cut lines to be used when laying the supports at perimeter edges or corners.

A Low Profile version of this support is also available for areas where low threshold heights are an issue - Please see our 1836LP Range for details.

In addition to the pedestal supports for Decking and flooring, the StrataRise range includes versions for use with any type of self-supporting tile, or paver, with a choice of either 2mm or 4mm ribs for spacing the tiles/pavers apart. Acoustic underlay Rubber Bases and rings are also available.

Download our Product Brochure or Technical Specifications for more information on our ranges of Support Systems.

Examples of floors laid using StrataRise pedestal supports

Accessories