StrataWedge Professional Wedge and Spacer Clip Tile Levelling System

The StrataWedge Tile Levelling system eliminates lippage and ensure perfectly flat tiling with precise spacing - for 1/8" to 3/4" thick tiles

The StrataWedge D-Clip leveling system has been developed as a professional, easy to use, system to eliminate uneven planes between tiles due to imperfect screed coatings or surface variations. It permits accurate alignment of tile surfaces, acting as both leveler and spacer, and ensures regular joint widths between tiles. X and T-spacers can optionally be used to ensure perfect tile corner alignments. The system comprises:

  • StrataWedge Spacer Levelling D-Clips
  • StrataWedge D-Clip Wedges
  • StrataWedge D-Clip Pliers

The D-shaped plastic spacer levelling clips are designed to be fitted in the joints between two tiles. A plastic wedge is then inserted into the aperture in the centre of the clip and is squeezed by a pair of specially designed pliers until it sits flush on the surface of both tiles, thus ensuring they are perfectly level.

Once the tile adhesive has set, the clip is easily broken off leaving only its base embedded in the adhesive under the tiles. The plastic wedge is re-useable so users need only buy  spacer levelling clips for subsequent installations.


Two ranges of Spacer Levelling Clips are available, one for tiles that are from 3mm to 12mm (1/8" to 1/2") in thickness, the other is for tiles from 12mm to 20mm (1/2" to 3/4") in thickness. The 3mm to 12mmclips are available for 1mm (3/64"), 1.5mm (1/16"), 2mm (5/64") and 3mm (1/8") joint widths. The 12mm to 20mmclips are available for 1mm (3/64") and 2mm (5/64") joint widths. The Wedges and the Pliers work with both sizes of clip.

Eliminate lippage and ensure perfectly flat tiling with precise spacing

StrataRise  ... the professional's choice!
StrataWedge Tile Leveling System for lippage free tile installation

Starter Kit

StrataWedge Tile Levelling System - Starter Kit
Packed in a handy re-usable storage box this kit is ideal for getting started with the StrataWedge Tile Levelling System. It contains 300 each of the Wedges and Spacer Levelling D-Clips for 3mm to 12mm (1/8" to 1/2") thick tiles - 3 to 12mm - 1.5mm (1/16") wide, along with a pair of D-Clip Professional Pliers.

CONTAINS

1 x Professional Pliers
300 x Wedges
300 x Spacer Leveling D-Clips

Installation Guide

Spread the adhesive, place the first tile into position, and tap it down with a rubber mallet, check level with a spirit level. Insert two or more D-Clips, according to tile size, underneath the tile edges into the bed of adhesive. Place the next tile into position and tap down. Optionally insert an appropriate X-shaped or Y-shaped tile joint spacer at the tiie corner intersections to ensure perfect joint alignment.

Slide a wedge into each of the D-Clips and press into position, using the special clamping pliers, to achieve perfect alignment between the tile surfaces.
(Hint: Run a flat edge over the tile surfaces to check that the alignment is perfect and that there is no ‘lippage’). Proceed with laying and levelling the remaining tiles.

Leave until the tile adhesive is dry. The wedges and D-Clips can then be removed with a sharp tap with a rubber headed mallet, ideally in a parallel direction to the tile edge. This will cause the D-Clips to break off level with the tile base, leaving the joints ready for grouting. The Wedges can be saved for re-use.

D-Clip Pliers

Special pressure adjustable D-Clip Pliers, for squeezing the wedges into the Spacer Levelling D-Clips, are available in Plastic for standard applications and in Metal for regular professional use.

StrataWedge Standard Wedge Pliers
Standard
StrataWedge Professional Pliers
Professional
StrataWedge Pliers - Adjustment Guide
StrataWedge D-Clip Spacer 3 to 12mm (1/8" to 1/2")
D-Clip Spacer 3 to 12mm (1/8" to 1/2")
StrataWedge D-Clip Spacer 12 to 20mm (1/2" to 3/4")
D-Clip Spacer 12 to 20mm (1/2" to 3/4")
StrataWedge D-Clip Wedge
D-Clip Wedge
SKUDescriptionBarcodePack Qty
SW-D-CLIP-WEDGED-Clip Wedge37 91941 30105 550 pcs.
SW-D-CLIP-PLIERStandard D-Clip Pliers37 91941 30106 21 pcs.
SW-D-CLIP-PLIER-PROProfessional D-Clip Pliers37 91941 30107 91 pcs.
SW-D-CLIP-1220-1D-Clip Spacer 12 to 20mm - 1mm thick37 91941 30108 650 pcs.
SW-D-CLIP-1220-2D-Clip Spacer 12 to 20mm - 2mm thick37 91941 30109 350 pcs.
SW-D-CLIP-312-1D-Clip Spacer 3 to 12mm - 1mm thick37 91941 30110 9100 pcs.
SW-D-CLIP-312-1.5D-Clip Spacer 3 to 12mm - 1.5mm thick37 91941 30111 6100 pcs.
SW-D-CLIP-312-2D-Clip Spacer 3 to 12mm - 2mm thick37 91941 30112 3100 pcs.
SW-D-CLIP-312-3D-Clip Spacer 3 to 12mm - 3mm thick37 91941 30113 0100 pcs.

Quantum Rubber Limited
4 Lees Mill, Shuttle Fold
Haworth
West Yorkshire BD22 8RB.

keyboard_arrow_up